1.2.2. MEASure Subsystem

1.2.2.1. MEASure[:SCALar]:ALL[:DC]?

This query command returns the average measurements as a list for current, voltage, power, and resistance, respectively.

Query Syntax:

MEASure[:SCALar]:ALL[:DC]?

Examples:

MEAS:ALL?, MEASURE:ALL:DC?

Return Parameter Format:

<NR2>, <NR2>, <NR2>

1.2.2.2. MEASure[:SCALar]:CURRent[:DC]?

This query commands the Accessory to measure and return the average current through the DC terminals.

Query Syntax:

MEASure[:SCALar]:CURRent[:DC]?

Examples:

MEAS:CURR?, MEASURE:CURRENT:DC?

Return Parameter Format:

<NR2>

1.2.2.3. MEASure[:SCALar]:POWer[:DC]?

This query commands commands the Accessory to measure and return the average power at the DC terminals.

Query Syntax:

MEASure[:SCALar]:POWer[:DC]?

Examples:

MEAS:POW?, MEASURE:POWER:DC?

Return Parameter Format:

<NR2>

1.2.2.4. MEASure[:SCALar]:VOLTage[:DC]?

This query commands commands the Accessory to measure and return the average voltage at the DC terminals. If the remote sense function is used and engaged, this command returns the voltage measured at the sense terminals.

Query Syntax:

MEASure[:SCALar]:VOLTage[:DC]?

Examples:

MEAS:VOLT?, MEASURE:VOLTAGE:DC?

Return Parameter Format:

<NR2>