.. TODO: create message listing from EnumStatusRegister.m, see GEN2-4192

.. _messages:

Status Messages
---------------

The |product_type| has various messages, which elaborate on the product's present :ref:`status <statuses>`. A message may indicate normal operation, power limiting as a result of the |product_type|'s operating profile, or steps to resolve a fault.

**Messages for Status: Enabled**

* Output enabled.

**Messages for Status: Disabled**

* Output disabled.

**Messages for Status: Soft Fault**

* Voltage exceeded the trip point. Press CLEAR to resume.
* Current exceeded the trip point. Press CLEAR to resume.
* Power exceeded the trip point. Press CLEAR to resume.
* Remote sense loss. Only 10 percent compensation is allowed. Press CLEAR to resume.
* Voltage has fallen below the trip point. Press CLEAR to resume.
* Global shutdown occurred.


**Messages for Status: Hard Fault**

* Global shutdown occurred.
* Chopper stage currents have exceeded product rating. Verify load does not exceed product ratings.
* Excessive communication errors detected. Check cabling and addressing resistors. Call technical support.
* Product has exceeded its voltage rating. Investigate the cause before retrying.
* Product has exceeded its current rating. Investigate the cause before retrying.
* The internal power supply has blown a fuse. Contact Magna-Power for support.
* Analog or Digital input voltage exceeded the max voltage specified. Investigate the cause before trying again.
* The AC input section has a blown fuse. Contact Magna-Power for support.
* One of the AC Input Phase is missing. Investigate the cause before retrying.
* One or more fan has stopped spinning. Investigate the cause before retrying.
* Power Processing module has exceeded its temperature rating. Check for input current rating and the ambient temperature.
* Output Filter module has exceeded its temperature rating. Check for ventilation blockages and the ambient temperature.
* Output Capacitors have exceeded their temperature rating. Check for output current ripple and the ambient temperature.