Careers at Magna-Power

미국에서, 진짜를 만드십시오.

전 세계 실험실, 공장, 테스트 현장을 가동하는 프로그래머블 전원 장치를 설계·제조하는 가족 창업 팀에 합류하여, 여러분의 노력이 실제 제품으로 출하되는 순간을 직접 경험해 보십시오.

Explore openings Why Magna-Power

Our Culture

한 지붕 아래, 하나의 팀.
Company team 2025 Story-Fig5

Magna-Power는 한 지붕 아래 하나의 팀입니다.

제품을 설계하는 사람들, 제품을 만드는 사람들, 제품을 판매하고 지원하는 사람들, 그리고 회사를 운영하는 사람들 모두가 뉴저지주 플레밍턴에서 나란히 일합니다.

아이디어, 질문, 도움은 불과 30초 거리에서 주고받을 수 있으며, 누구나 자신의 작업이 실제 결과물로 출고되는 것을 직접 확인할 수 있습니다.

저희는 가족이 창립한 회사이며, 분기가 아닌 수십 년을 내다보며 생각합니다.

저희는 장기적인 커리어에 투자하고, 성과에 따라 승진시키며, 어떤 자리에서 나온 아이디어든 좋은 아이디어라면 실행에 옮깁니다.

저희는 서로에게 많은 것을 기대합니다. 자신의 업무에 책임을 지고, 약속을 지키며, 조기에 문제를 제기하고, 동료를 챙기는 것이 그것입니다.

그리고 저희는 많은 것을 돌려드립니다. 여러분의 이름을 알고 함께 일하는 리더들, 1981년부터 성장해 온 회사의 안정성, 그리고 중요한 일을 가능하게 하는 무언가를 미국에서 만들며 자신이 기여한 부분을 정확히 아는 자부심이 바로 그것입니다.

훌륭한 인재를 찾고 있습니다

Magna-Power는 다양한 기술 분야에서 높은 역량을 갖춘 역동적인 중소기업입니다. 세계 수준의 팀이 원자재와 부품을 완제품으로 변환하여 최고의 성능과 품질의 제품을 만들어냅니다.

  • 2022 Winner, Hunterdon County Business of the Year
  • 2016 Winner, New Jersey Manufacturer of the Year
  • 2016 Finalist, New Jersey Family Business of the Year
Magna-Power에서의 생활 1
Magna-Power에서의 생활 2
Magna-Power에서의 생활 3
Magna-Power에서의 생활 4

Open Positions

팀에 합류하세요

저희는 엔지니어링, 제조, 운영 분야에서 인재를 채용하고 있습니다. 저희는 경쟁력 있는 보상, 포괄적인 건강 혜택, 401k 저축 플랜을 제공하는 균등 기회 고용주입니다.

Don't see your role? Contact our human resources team at [email protected] to keep your information on file.

Benefits & Perks

We invest in our team

넉넉한 휴가 icon

넉넉한 휴가

진정으로 휴식하고 재충전할 수 있는 시간.

포괄적인 복리후생 icon

포괄적인 복리후생

건강, 시력, 치과, 생명 및 장애 보험.

401k 저축 플랜 icon

401k 저축 플랜

회사 매칭이 포함된 우수한 패키지.

역동적인 문화 icon

역동적인 문화

투명성, 협업, 학습.

교육 지원 icon

교육 지원

승인된 프로그램의 학비가 지원됩니다.

현대적이고 청결한 시설 icon

현대적이고 청결한 시설

맞춤 설계된 자사 소유 시설입니다.

무료 전기차 충전 icon

무료 전기차 충전

매 근무일 현장에서 무료로 충전하세요.

유연 지출 계좌 icon

유연 지출 계좌

의료비 및 통근비에 대한 세전 공제 혜택입니다.

A great place to live

커리어를 넘어 삶을 함께 쌓아가는 곳

뉴저지주 헌터던 카운티와 펜실베이니아주 벅스 카운티는 미국에서 가장 아름다운 카운티 중 하나로 꾸준히 선정되며, 우수한 학교 환경과 뉴욕시 및 필라델피아로의 편리한 접근성을 갖추고 있습니다.

Internship & Co-Op Program

개념에서 생산 현장까지

연중 운영되는 당사 프로그램은 아이디어를 엔지니어링에서 프로토타입을 거쳐 완전한 제조 단계까지 실현할 수 있는 탁월한 기회를 제공합니다. 모든 엔지니어링 기능과 비즈니스 운영 전반에 걸친 다양한 기회가 있으며, 경험 풍부한 멘토와 함께 회사가 직면한 가장 어려운 도전들을 다루게 됩니다.

Open positions are posted under Open Positions on the date applications begin being accepted.

Spring & Summer
Applications: Dec 1 – Feb 10
Fall & Winter
Applications: May 1 – Jun 15

Get notified by email when internship application acceptance opens.

Past Intern & Co-Op Projects

Real work that shipped. Every project here was owned by a student, taken from concept to the production floor.

Dashboard Software Software
Summer 2016

Dashboard Software

MagnaDASH is custom software for collecting, analyzing, and displaying information from our company database. The the backend was written in Python using the CherryPy and hosted on an Ubuntu virtual machine. The clients are Intel Compute Sticks, which was found was the most compact solution for driving the 4K resolution televisions. The front end was programmed using Node.js, Bootstrap and Sass. The project integrates with our continuous integration so that changes in SVN automatically triggers updates to the server, rebuilding of the frontend, and resetting the many clients at the company.

Ben Goldberg
Rochester Institute of Technology (RIT)
View project
Product Testing Cell Mechanical
Summer Intern 2019

Product Testing Cell

The Testing Department needed to be optimized by going vertical! Testing equipment were moved into a tall racks on wheels. This increased the density of measurement equipment per testing cell and could be rearrangement as needed. Mock ups and studies were made to ensure we could test the entire product line. We had daily communication with the Testing Department to gather feedback. Bill of materials, mechanical drawings, and electrical wiring diagrams were created so that production could build them. We leveraged our sheet metal fabrication capability to punched out custom panels for emergency stops and AC input control. Test carts were overhauled for front access, further improving Magna-Power's commitment to safety.

Hank Huang
Rutgers University
View project
Online Product Configurator Software
Summer Intern 2019

Online Product Configurator

The Magna-Power Product Configurator (Gen 1) was designed as a way document and present the various options, constraints, and ranges in voltage, current, and power. During the build process, a Python script grabs all the active model information from the Postgres database and exports it as a dictionary. Another python function was created to filter these results. The filter contains the various rules imposed by engineering and sales. The filter was written in Python, as that is the company's preferred language, and can be read by across teams. Transcrypt was used to convert this code into JavaScript functions. File based storage greatly simplified website integration and improved speed, as no database connection is required. User interface was programmed using JavaScript that injected DOM elements onto the page. The fronted contains Bootstrap and CSS. Final software was also built into a Craft Module so that it could be integrated on the company website.

Lorenzo Sanelli
Hunterdon Central
View project
Real-Time Inventory System Software
Summer 2017

Real-Time Inventory System

Real-time inventory tracking and kitting. Material gets deducted as soon as it leaves the shelf during kitting. Material gets added as soon as it enters stockroom. Required hardware that made data entry fast, simple, less error prone, and portable. A rugged Android handheld computer was selected with numeric keypad and laser bar-code scanner. A Python shell utility was created using npyscreen, terminal application framework, and hosed on an Ubuntu virtual machine. Users log into the application using SSH. This implementation allows simultaneous picking and usage, easy to program maintain, quick to navigate (hot-keys), and is cross platform.

Ben Goldberg
Rochester Institute of Technology (RIT)
View project
1U Digital Front Panel Electrical
Spring-Summer 2019

1U Digital Front Panel

The VFD display is the single most expensive component in the product. Extensive research was needed to see if it could be replaced with newer, lower cost OLED or vertically aligned LCD. Vendors were contacted all over the world. Specifications such as view angle, brightness, burn-in, life expectancy, response time, were compared – traits expected in a rack mount supply operating for decades. Despite being the oldest technology, it excelled in each of these categories and was grandfathered into the new design. 1U Gen2 Front Panel was designed in Altium Designer, Autodesk Inventor, and AutoCAD. The 3U design was broken up into multiple boards stacked using board-to-board connectors. Stacking allowed us to cram all that technology into 1.75". Microcontroller display drivers, written in C, were updated to accommodate an additional 5th digit on the 7-segment display. A new, smaller, rubber keypad was designed along with sheet metal.

Hieu Mai
Drexel University
View project
Industrial Network Connectivity Electrical
Summer 2020-2021

Industrial Network Connectivity

Implementing Common Industrial Protocol (CIP) would allow Magna-Power to address the industrial automation market. The goal was to provide native serial Modbus and add-on Ethernet-based EtherCAT, Profinet, and EtherNet/IP. Modbus protocol was programmed and now comes standard on ALx MagnaLOADs and DBx Accessories. The ethernet-based protocols were implemented with the help of Anybus communication modules manufactured by HMS Networks. The driver-level source code and API provided by Anybus were integrated within the existing code base. Drivers detect the type of module installed, and on startup, adapts automatically. A new communication printed circuit board (PCB) was designed to fit different Anybus modules and therefore supports multiple protocols. Each protocol was documented and included setup, configuration, and validation examples. Full details on each command was programmed to be exportable and was used to auto-generate documentation. In addition to completing this major project, Aaron was learning Altium and supporting production by fixing PCB designs so that they could be more easily manufactured.

Aaron Reers
Rensselaer Polytechnic Institute
View project
Inventory Library Parts Creation Mechanical
Summer 2020

Inventory Library Parts Creation

Successful adoption of 3D modeling required creating a mechanical library of all the Magna-Power's common parts: screws, nuts, studs, etc. The project evolved to a larger scope than anticipated because parts were described consistently, which resulted in duplicate part records. Much thought went into grouping parts, designing an internal naming system, identifying component parameters, and using those parameters to automatically create version of parts that match what is stocked. The library created will hopefully find use for next 40 years!

Alec Rybarski
Stevens Institute of Technology
View project
Production Tooling and Jig Designs Mechanical
Summer 2021

Production Tooling and Jig Designs

Production inefficiencies are often solved with a jig or fixture that make parts easier to process or increases the number of parts that can be processed at a time. The Printed Circuit Board (PCB) Department reported problems with their jig for soldering a small heatsink onto diodes and PCBs. The existing jig was cumbersome and prone to breaking. The fixture was redesign by expanding the diode opening giving the assembler better access for soldering. A corner edge was added to align the diodes and heatsinks to the PCB. Binder clamps were replaced with toggle clamps to improve surface contact with soldered components and increase heat conduction. The Testing Department wanted to consolidate all the equipment to a single rack to recover workspace and speed up testing. Alec designed custom panels and shelving needed for panel mounting measurement equipment. One custom shelf was dedicated to automated data acquisition, which need mounting locations for PCBs, power supplies, BNC jacks, etc. The task required learning how to read an electrical schematic and layout components efficiently to minimize wiring paths. The oscilloscope, which used to take up a lot of benchtop space, was mounted into the a rack with a custom panel.

Alec Rybarski
Stevens Institute of Technology
View project
Automated Test System Electrical
Summer 2021

Automated Test System

An Automated Test System (ATS) was created to be flexible and future-proof, since it is mostly Magna-Power’s own design. Existing power supply test procedures were evaluated to determine acquisition and interface requirements, such as the analog resolution, quantity of input/output channels, sampling speed, voltage levels, etc. Software called PiDaq was developed for a single-board-computer (SBC) to control the ATS. The SBC talked to sensors and MUXs using SPI, I2C communications, and its own GPIOs. Magna-Power’s standard test software, TestAndCal, talked to the ATS using a Web API. A python-based library was developed to wrap this API. Logan made additional hardware improvements to the test rack. He wrote ladder logic for the programmable logic controller (PLC) to adjust voltage on the three-phase variable transformer and described the operating state of the rack with illumination patterns on the stack light. Another Python-library was created so that TestAndCal could interface with the PLC. A lot of thought went into safety, especially when TestAndCal takes control of the rack to automate tests.

Logan Greif
Rowan University
View project

지금 바로 시작하세요

채용 공고에 지원하시거나, 향후 채용을 위해 정보를 파일로 보관해 드릴 수 있도록 연락해 주세요.

View job openings Contact us