Magna-Power liefert 1 MW wassergekühlte MagnaLOAD DC-Elektronische Last an die US Navy
Magna-Power Electronics, a leader in programmable power products worldwide, is proud to announce the delivery of a 1 MW water cooled DC electronic load to the US Navy, which will be used to research, develop, test, and evaluate the operation of energy storage modules (ESMs) in a shipboard environment. To meet this requirement, Magna-Power delivered ten (10) of its standard 100 kW WRx Series MagnaLOAD DC electronic loads, configured in two master-slave sets of 500 kW.
The 500 kW DC electronic load systems will be part of a real-time hardware-in-the-loop (HIL) simulator, which will drive the MagnaLOADs using its high-speed analog input. A digital simulator will be used in place of the actual electric shipboard equipment to conduct model-based simulation of the shipboard electric load. The MagnaLOADs will mimic discharge profile of the ESM, depending on the components under test and the model being simulated.
Given the nature of these tests, which can last for days, Magna-Power designed its MagnaLOAD products for continuous full-power operation at 50°C ambient operating temperature and cooling water temperature up to 25°C. Microchannel water cooled heatsinks were designed and are manufactured by Magna-Power, allowing the company deliver power dissipation of 12.5 kW per 4U. In addition, Magna-Power’s new patented Active Resistance Technology (US Patent 9,429,629) combines a switched binary matrix of resistances with MOSFETs to deliver features and performance consistent with traditional electronic loads, at a fraction of the price. The product features a wide operating range, allowing full power to be achieved over the range 50% to 100% rated voltage in its high power range. A separate low power range enables high current operation at lower voltages.
“While a significant engineering undertaking for the company, the result is a brand new product line, three new product series, and a new robust digital control scheme that will be far-reaching,” said Ira J. Pitel, Ph.D., President of Magna-Power Electronics. He continued, “as a company, we are very proud to support this program and greatly value the US Navy’s support and cooperation to allow Magna-Power to realize this system.”
Dieser Auftrag war der Bewährungstest für Magna-Powers neue verteilte DSP-Digitalsteuerungsplattform MagnaLINK™, die den Weg für die zukünftigen Produkte des Unternehmens ebnet. Diese neue Steuerungsplattform, verfügbar in der MagnaLOAD-Produktlinie, bietet gleichzeitige Hochgeschwindigkeits- und hochzuverlässige Steuerung sowie Messwertaggregation von 40 Modulen in einer Umgebung mit hoher elektromagnetischer Störstrahlung. Darüber hinaus ermöglicht MagnaLINK ein simultanes Master-Slave-Firmware-Upgrade mit automatischer Erkennung neuer Produktkonfigurationen und automatischer Neueinstellung der Konfiguration.
Nach vollständiger Entwicklung sollen die ESMs in das elektrische System des Schiffes integriert werden und je nach den elektrischen Anforderungen des Schiffes dynamisch als Stromquelle oder Stromsenke fungieren. Die MagnaLOAD DC-Elektronische-Last-Produktlinie ist ab sofort erhältlich und umfasst zahlreiche luft- und wassergekühlte Modelle in drei (3) Produktserien.
Über Magna-Power Electronics
Magna-Power entwickelt und fertigt die umfangreichen MagnaDC programmierbaren DC-Netzgeräte (1,5 kW bis 3.000 kW+) und MagnaLOAD DC-Elektronische Lasten (1,25 kW bis 500 kW+) Produktlinien in den USA nach höchsten Qualitätsstandards unter Verwendung robuster Leistungswandlertopologien. Über 320 MW an Magna-Power-Produkten sind weltweit im Einsatz, mit kontinuierlichem Wachstum, angetrieben durch die Tausenden von Modellen des Unternehmens, das Engagement für Qualität und robotergestützte Fertigungsautomatisierung, schnelle Fertigungszeiten sowie weltweiten Vertrieb und Support.