Zubehörprodukt
MagnaLINK Cable
Kombinieren Sie die Leistung einzelner Magna-Power xGen Netzteile und elektronischer Lasten zu einem einzigen, leistungsstärkeren, vollständig synchronisierten System. Das offizielle MagnaLINK™ Master-Slave-Verbindungskabel ist der entscheidende Schlüssel zur vollen Ausschöpfung des Potenzials Ihrer Mehrteilekonfiguration.
Dieser speziell entwickelte Kabelbaum bietet die vollständige Kommunikationsverbindung. Er gewährleistet einen nahtlosen, schnellen Datenaustausch und präzises analoges Stromfeedback, sodass Ihre kombinierten Einheiten als ein zusammenhängendes System arbeiten.
Hauptmerkmale
- Offizielles, werkseitig zugelassenes Zubehör für alle MagnaLINK™-fähigen Produkte.
- Ermöglicht Hochleistungs-Master-Slave-Betrieb (parallel oder in Reihe).
- Integrierter Kabelbaum mit RJ11-Daten- und Molex 1545-Strommessanschlüssen.
- Verwendet das schnelle, proprietäre MagnaLINK™-Protokoll für Echtzeitsteuerung.
- Plug-and-Play-Installation für einfache Systemerweiterung.
- Robustes Design mit eingebautem Abschluss zur Sicherstellung der Signalintegrität.
- Unentbehrlich für die Systemsicherheit, ermöglicht Fehlererkennung bei Trennung.
Mit einem Experten sprechen
Beschreibung
Overview
The MagnaLINK™ interconnect cable harness provides the two critical connections required for true master-slave operation. The system utilizes Magna-Power's dedicated MagnaLINK port for all product-to-product traffic.
- Data Link (The Brains): This connection transmits the high-speed MagnaLINK™ digital protocol. It handles all control commands, system configuration, real-time operating values, and multi-processor firmware upgrades between the master and slave units.
- Current Sense (The Nerves): This analog connection is essential for accurate load sharing. The current sense connector plugs directly into the Current Sense port on each unit, providing the master with the feedback needed to ensure each slave contributes its precise share of the total current. In addition, every current sense cable provides a spliced additional current sense connector, allowing current connectors to be daisy-chained.
By integrating both digital control and analog feedback into a single, factory-tested harness, setup is simplified and performance is validated.
Configurations
The MagnaLINK™ cable harness comes in two different configurations. Both configurations utilize an RJ11 cable wrapped with one turn through a common-mode choke to interconnect the MagnaLINK ports.
Configuration A utilizes Molex 1545 connectors for the current sense connections. Configuration B utilizes
| Configuration | MagnaLINK Connector Type | Current Sense | Compatible Products |
| A | RJ11 | Molex 1545 | ALx Series ARx Series WRx Series |
| B | RJ11 | Molex Micro-Fit 3.0 43645 | SLx Series |
Lengths
| Length ID | Approximate Length | Intended Use |
| 1 | 1-ft (30.5 cm) | Products mounted without spacing between them within the same rack (most common) |
| 2 | 6-ft (182.9 cm) | Products spaced apart within the same rack |
3 | 12-ft (365.8 cm) | Products between different racks |
Bestellung
| SKU | Konfiguration | Länge | |
|---|---|---|---|
| MagnaLINK-A1 | A | 1 | |
| MagnaLINK-A2 | A | 2 | |
| MagnaLINK-A3 | A | 3 | |
| MagnaLINK-B1 | B | 1 | |
| MagnaLINK-B2 | B | 2 | |
| MagnaLINK-B3 | B | 3 |