Produit accessoire
MagnaLINK Cable
Combinez la puissance des alimentations xGen Magna-Power individuelles et des charges électroniques en un système unique, de plus haute puissance et entièrement synchronisé. Le câble d'interconnexion maître-esclave MagnaLINK™ officiel est la clé essentielle pour libérer tout le potentiel de votre configuration multi-unités.
Ce faisceau de câbles conçu à cet effet fournit l'interconnexion de communications complète. Il assure un échange de données fluide et à haute vitesse ainsi qu'un retour de courant analogique précis, garantissant que vos unités combinées fonctionnent comme un seul système cohérent.
Principales Caractéristiques
- Accessoire officiel, approuvé en usine, pour tous les produits compatibles MagnaLINK™.
- Permet un fonctionnement maître-esclave haute puissance (parallèle ou série).
- Faisceau intégré avec connexions de données RJ11 et de détection de courant Molex 1545.
- Utilise le protocole MagnaLINK™ propriétaire à haute vitesse pour le contrôle en temps réel.
- Installation plug-and-play pour une extension aisée du système.
- Conception robuste avec terminaison intégrée pour garantir l'intégrité du signal.
- Essentiel pour la sécurité du système, permettant la détection de pannes lors de la déconnexion.
Parlez à un expert
Description
Overview
The MagnaLINK™ interconnect cable harness provides the two critical connections required for true master-slave operation. The system utilizes Magna-Power's dedicated MagnaLINK port for all product-to-product traffic.
- Data Link (The Brains): This connection transmits the high-speed MagnaLINK™ digital protocol. It handles all control commands, system configuration, real-time operating values, and multi-processor firmware upgrades between the master and slave units.
- Current Sense (The Nerves): This analog connection is essential for accurate load sharing. The current sense connector plugs directly into the Current Sense port on each unit, providing the master with the feedback needed to ensure each slave contributes its precise share of the total current. In addition, every current sense cable provides a spliced additional current sense connector, allowing current connectors to be daisy-chained.
By integrating both digital control and analog feedback into a single, factory-tested harness, setup is simplified and performance is validated.
Configurations
The MagnaLINK™ cable harness comes in two different configurations. Both configurations utilize an RJ11 cable wrapped with one turn through a common-mode choke to interconnect the MagnaLINK ports.
Configuration A utilizes Molex 1545 connectors for the current sense connections. Configuration B utilizes
| Configuration | MagnaLINK Connector Type | Current Sense | Compatible Products |
| A | RJ11 | Molex 1545 | ALx Series ARx Series WRx Series |
| B | RJ11 | Molex Micro-Fit 3.0 43645 | SLx Series |
Lengths
| Length ID | Approximate Length | Intended Use |
| 1 | 1-ft (30.5 cm) | Products mounted without spacing between them within the same rack (most common) |
| 2 | 6-ft (182.9 cm) | Products spaced apart within the same rack |
3 | 12-ft (365.8 cm) | Products between different racks |
Commande
| SKU | Configuration | Longueur | |
|---|---|---|---|
| MagnaLINK-A1 | A | 1 | |
| MagnaLINK-A2 | A | 2 | |
| MagnaLINK-A3 | A | 3 | |
| MagnaLINK-B1 | B | 1 | |
| MagnaLINK-B2 | B | 2 | |
| MagnaLINK-B3 | B | 3 |