4.11. Electrical Check

Turn on the Accessory using the black control power switch on the bottom left of the front panel. Immediately after turn-on, the Accessory undergoes a self-test that check control and input circuitry. The Magna-Power emblem should be displayed during this self-test along with the the word Accessory.

Note

After turning the unit on, it will take about 45 seconds for the Accessory to initialize before it is ready for use.

When self-test is complete, the Menu display should show the unit’s Standby status, the voltage meter should show whatever the DC bus voltage is, and the current meter should show 0.000. The fans should be running at a low speed.

If the self test fails, the fans do not come on, or the unit fails to come into standby, power off the Accessory off and back on with the black power switch. If you continue to have similar issues, contact Magna-Power support for further assistance.