MagnaDC Programmable DC Power Supplies
MagnaDC 徽标

可编程直流电源

强大的电流喂养电源处理•375,000多个配置 Magna-Power的MagnADC产品系列可编程DC电源已有40年的历史发展,并结合了电力电子产品的最新创新,并在Magna-Power的标志性电流喂养的电源加工拓扑结合了基础上。产品线使用通用控制平台,涵盖了超过160,000个配置,涵盖了非常宽的电压和电流,使用户可以准确选择适当的额定产品,而无需超大电源。提供标准选项,以定制预期应用程序的性能或冷却。所有MagnADC可编程DC电源都具有常见的SCPI命令集,并配备了LabView驱动程序,IVI驱动程序,Software GUI,安全互锁和孤立的外部I/O端口。另外,所有Magna-Power产品均设计为在50°C下连续地在峰值等级下运行

产品系列

尺寸
1U
楷模
171
功率范围
1.5 kW to 10 kW
电压范围
5 Vdc to 1000 Vdc
电流范围
1.5 Adc to 250 Adc
描述

SLX系列以40多年的电源创新为基础,拥有超过26,500多种不同的模型配置,是Magna-Power有史以来最可编程的DC电源系列。 SLX系列提供6个不同功率水平的型号,具有高度颗粒状的电压和电流。凭借行业领先的领先电力密度,坚固的电流式电源处理以及最先进的MagnAlink™分布式DSP数字控制架构,SLX系列符合研发,工业自动化的长期DC功率要求和过程控制应用程序。

尺寸
1U
楷模
127
功率范围
1.5 kW to 10 kW
电压范围
5 Vdc to 1500 Vdc
电流范围
1.5 Adc to 250 Adc
描述

The SL Series builds on over 40 years of power supply innovation at Magna-Power, designed from the ground up to meet the highly reliable power dense demands of ATE system integrators through Magna-Power's signature current-fed power processing topology. Utilizing state-of-the-art semiconductors and innovative internally designed and manufactured heat sinks, the SL Series offers industry-leading 1U (1.75” height) programmable power levels with models at 1.5 kW, 2.6 kW, 4 kW, 6 kW, 8 kW, and 10 kW while still maintaining an ambient operating temperature rating up to 50°C.

尺寸
2U
楷模
39
功率范围
2 kW to 10 kW
电压范围
2000 Vdc to 10,000 Vdc
电流范围
310 Adc to 600 Adc
描述

2U XR系列通过在2 kW,4 kW,6 kW,8 kW,8 kW和10 kW的2U封装中提供高电压(大于1500 VDC)和高电流(大于250 ADC)模型,从而补充了1U SL系列。 XR系列具有Magna-Power产品产品中最高的电压范围,最多10,000 VDC和高电流型号高达600 dC,所有这些型号都利用了公司的签名电流喂养的功率处理来提供强大的电源转换。此外,高精度编程和监视水平使电源测量值有信心,从而消除了对外部电力计的需求。

尺寸
3U to 16U
楷模
275
功率范围
5 kW to 100 kW
电压范围
5 Vdc to 6000 Vdc
电流范围
1.2 Adc to 8000 Adc
描述

The TS Series offers many models spanning a wide voltage and current range, while still maintaining among the highest power density rack-mount packaging. The TS Series covers voltages from 5 Vdc up to 6000 Vdc (floating) and current levels from 1.2 Adc up to 8000 Adc. Models 5 kW to 15 kW are available in a 3U chassis, models 20 kW and 25 kW are available in a 4U chassis, models 30 kW are available in a 6U chassis, models 40 kW and 50 kW are available in an 8U chassis with removable casters, models 75 kW models are available in a 12U chassis with removable casters, and 100 kW models are available in a 16U chassis with removable casters. In addition, there are several special low voltage high current models, enabling a more cost-effective solution for these requirements. All TS Series power supplies come standard with isolated 37-pin external I/O, RS232, Remote Interface Software, IVI drivers, and LabVIEW drivers for integration into a variety of programming environment.

尺寸
60U to 90U+
楷模
49
功率范围
150 kW to 2000 kW+
电压范围
32 Vdc to 6000 Vdc
电流范围
25 Adc to 24000 Adc
描述

Magna-Power Electronics MT Series uses the same reliable current-fed power processing technology and controls as the rest of the MagnaDC programmable power supply product line, but with larger high-power modules: individual 150 kW and 250 kW power supplies. The high-frequency IGBT-based MT Series units are among the largest standard switched-mode power supplies on the market, minimizing the number of switching components when comparing to smaller module sizes. Scaling in the multi-megawatts is accomplished using the UID47 device, which provides master-slave control: one power supply takes command over the remaining units, for true system operation. As an added safety measure, all MT Series units include an input AC breaker rated for full power. 250 kW modules come standard with an embedded 12-pulse harmonic neutralizer, ensuring low total harmonic distortion (THD). Even higher quality AC waveforms are available with an external additional 500 kW 24-pulse or 1000 kW 48-pulse harmonic neutralizers, designed and manufactured exclusively by Magna-Power for its MT Series products.

尺寸
楷模
38
功率范围
500 kW to 10 MW+
电压范围
100 Vdc to 6000 Vdc
电流范围
83 Adc to 5000 Adc (per unit)
描述

Magna-Power Electronics的ML系列从头开始设计,旨在设定功率密度和性能的新标准。利用先进的水冷技术,500 kW和1,000 kW ML系列型号的功率密度比Magna-Power的其他空气冷却型号增加了近四倍。通过在主从并联配置中连接,ML系列可以达到超过10 MW的功率水平。基于Magna-Power标志性的可靠电流馈电功率处理拓扑和创新的谐波中和技术,ML系列电源提供可靠且高效的电能转换,具有低谐波失真。这些电源在新泽西州Flemington设计和制造,体现了Magna-Power对质量、可靠性和先进工程的承诺。

集成选件

Magna-Power 产品提供标准集成选件,使产品的性能和通信接口能够针对特定应用进行定制。

Black Enclosure
选件
+C1
纹理黑色粉末涂层表面处理及黑色前面板
Blank Front Panel
选件
+FP1
FP1空白前面板选项移除所有前面板控件,仅保留状态指示灯和开/关摇臂开关,同时仍可通过计算机和用户I/O控制实现完整功能
CANopen
选件
+CAN
CANopen通信协议及双RJ-45接口,支持CAN总线通信,广泛应用于汽车行业
EtherCAT
选件
+ECAT
EtherCAT通信协议和双RJ-45接口,用于工厂自动化、运动控制和机器人领域的高性能通信
EtherNet/IP
选件
+EIP
EtherNet/IP通信协议及双RJ-45接口,具有EIS配置文件,适用于工业自动化,常用于Allen Bradley、Schneider Electric和Omron PLC
High Isolation Output
选件
+ISO
适用于额定电压为 250 Vdc 至 1000 Vdc 的型号,+ISO 选项可大幅提升输出隔离性能,适用于应用需要浮地连接或将设备串联且超出标准 ±1000 Vdc 输出隔离额定值的情况。
High Slew Rate Output
选件
+HS
一种硬件和控制修改方案,将标准输出级替换为低电容薄膜电容器和/或高均方根电流额定铝电解电容器。此选项可提供更高带宽以及更快的输出上升和下降时间。
IEEE-488 GPIB
选件
+GPIB
IEEE-488 通用接口总线(GPIB)通信接口,提供完整的命令支持,并与其他 GPIB 设备兼容
Integrated Blocking Diode
选件
+BD
在 MagnaDC 可编程直流电源的正极输出端内置散热片保护二极管,保护产品输出免受远超产品额定输出电压的反向电压损害。
LXI TCP/IP Ethernet
选件
+LXI
TCP/IP 以太网通信协议及单个RJ-45接口,符合LXI C类标准认证,适用于通过传统计算机网络进行套接字通信
Modbus-TCP
选件
+MTCP
Modbus-TCP通信协议和双RJ-45接口,支持完整命令集作为Modbus命令
Pedestal Base
选件
+PB
一款重型落地式平台底座,适用于机架机箱,可替代标准滚轮脚轮,专为固定安装设计。
PROFINET
选件
+PROF
PROFINET通信协议和双RJ-45接口,用于工业自动化,常用于西门子PLC
Ruggedized
选件
+RUG
内部产品加固处理,已经过独立测试,符合特定的MIL-STD-810G和RTCA DO-160冲击与振动规范。
Water Cooling
选件
+WC
采用集成式中央热交换器和特殊绕制的磁性元件,水冷功能适用于特定的Magna-Power电源,专为高密度封装系统机柜设计,适用于产品标准风冷方式散热能力受限的应用场合。

附件

可提供外部附件和集成服务。

BDx Module
1U阻断二极管模块,涵盖宽范围电压与电流,提供必要的冷却、电源控制接口及远程检测位置。
DBx Module
高性能附加模块,提供低于 10 ppm 的超高稳定性、高达 24 位分辨率以及高达 10 倍的纹波降低。
DC Power Cables
由Magna-Power按需定制的直流电源线,提供宽范围电压额定值、电流额定值及多种接头选项
MagnaLINK Cable
主从互联电缆,用于将多台 xGen 电源或电子负载合并为一个同步的更高功率统一系统。
Pitel Paste
由Magna-Power专为功率半导体使用而配制和生产的高性能热界面材料。
Rack Enclosures and Integration
各种尺寸的机架机柜,包括12U、24U、30U、36U、30Ux2和36Ux2,配备脚轮、风扇及产品集成。
RS485 Converter
工业级RS232至可寻址RS485转换器,插入产品的RS232端口。
Universal Interface Device
用于负载分担的主从接口设备。包含接口设备及(2)条带编织屏蔽层的D-Sub 37针电缆。
USB Edgeport Converter
工业即插即用 USB 转 RS232 转换器。适配器插入产品的 RS232 端口。